Residue Rotary Dryer Overview
Residue Rotary Dryer Introduction
Dongding Beer dregs dryer can quickly pre-dehydrate the wet beer slag with a moisture content of about 85% and then dry it to a dry product with a moisture content of about 10%.
The lees can be developed into non-conventional feed, which can greatly ease the feed resources. Stressful conditions reduce the cost of farming and increase economic efficiency.
At present, this set of equipment has been put into use by many domestic beer companies and feed processing companies.
Residue Rotary Dryer Applications
Dongding Rotary Dryer has a wide applications. It is applied to dry beer spent gains, brewery vinasse in brewery, distiller grains in winery, cane bagasse, soybean residue, etc.
Residue Rotary Dryer Working Principle
The Dongding Drying Equipment Brewery Dryer Production Line consists of brewer's dregs dehydration machine, heat source, feeder, drum drying system (single cylinder or triple cylinder), discharge machine, induced draft fan, unloader and power distribution Cabinet, smashing system, packing system and other components.
The specific process is as follows: wet slag with moisture content above 80% is squeezed and dehydrated by the dehydration equipment and the moisture is reduced to about 65%, and then through the spiral feeding machine enters the drying system to be dried. Uniformly distributed in the roller board, under the action of rolling, materials are fully dispersed and contacted with the hot air, speeding up the drying heat transfer, mass transfer. During the drying process, the beer slag is discharged to the stencil unloader valve of the Beer dregs dryer under the action of the inclined board and the heat medium. The dried beer slag processed by the system has good color, aromatic odor and strong animal palatability.
Residue Rotary Dryer Advantages
1. It has high mechanization degree, high production capacity and continuous operation.
2. The structure of dryer is excellent, simple, easy operation.
3. Low failure rate, low maintenance cost and low power consumption.
4. Good uniformity , rare delicacy after drying.
5. Use frequency conversion to control material flow, which can be easily adjusted according to the needs of users.
The above pictures are about the material before dried and after.