Biomass Pellet Production Line Overview
Wood Pellet Plant Introduction
Our complete wood pellet plant has a compact structure, lower energy consumption and is highly efficient. Every machine in the wood pellet line can be designed and manufactured according to customers’ requirements.
The whole process of wood pellet line can be highly automatically controlled.
9 Steps For Biomass Pellet Production Line
According to the material clients may put into use, the running procedures for wood pellet plant are distinguished. However, the production principles seem similar to each other. Technically, the process may involve as follows:
If you use wood logs, timber or lumber as material for a wood pellet Plant, the first step is to debark logs to facilitate following steps of chipping and pulverization, therefore a wood barking machine is demanded.
The step is to reduce size of the material from logs to wood chips with the universal size of about 2cm*2cm for pulverization.
Generally, hammer mill will be applied to crush chippings into smaller size of powder. However, a, integrated crusher can be used as well to decrease size of material for pelletization.
Besides, two-time pulverizing may be considered as well to achieve a better pelletizing performance and ensure pellet mill will work stably.
A sifter is bound to use if the material you possess are beyond purity. The step is to cleanse and purify material with iron scraps, oversized impurities and alleviate damages as well as wear and tear to successive machines.
Apart from the special sifting equipment, We will offer magnet tubes installed on conveyors and pre-pelletizing surge bin to multi-deironing metal foreigner matters.
The moisture content of material may remain higher than the required for pelletization. Therefore drying system is needed to reduce moisture content to about 12%-15% for pelletization, Usually biomass rotary drum dryer is the best choice.
Pellet mill is the most pivotal machine within a pellet plant. After being pelletized, material will be formed into granule shape or column/cylinder shape.
For a larger scale plant, from time to time more than one wood pellet mill is needed, for example 4 or 6 tons pellets per hour and Dongding is also excelling in providing large scale wood pellet plants combined with pellet mill assembly.
Newly produced biomass pellets are scolding due to the high temperature and high pressure during pelletizing. And a cooler will then be demanded to ensure the ensuing packaging and a longer storage time of pellets.
Some powdery material may also flow from pellet mill with qualified pellets, in this regard, it is proved that a sieve will separate the small amount of disqualified mealy material from good pellets and also to qualify pellet packages.
Pellets can be weighed and packed in bags to facilitate pellet storage, transportation and marketing. The packing scale models are varied according to clients' demands.
We can offer both small bag packing scale and bulk bag packing scale. And Packing machine offered by Dongding is also integrated with sealing machine as a whole.
Wood pellet plants manufactured by Dongding cover a wide range of pruduction yield from 0.5t/h to 12t/h, but for a smaller pellet plant with production output of less than 0.5t/h, it can be offered as well such as a biomass pellet project of 300kg/h or 200kg/h.
40T/H Biomass Pellet Plant Solution For Reference